For maximum structural rigidity, curtain hoods feature rolled edges and are formed from 24-gauge, hotdipped galvanized steel.
FireCoil hoods include a flame baffle that is activated by a fusible link. Standard on Factory Mutual-approved doors. Optional on UL-approved doors.
|Type||Commercial Fire-Rated Rolling Doors|
|Size||30' with Slat Restrictions|
|Operation||Manual, Hand Chain, or Crank; Motor: Bracket|
|Drive||Left or Right Hand|
|Fire Rating||3-Hour Factory Mutual, 4-Hour Underwriters Laboratory|
|Fire Listing||FM, UL, CSFM, ISO-3008, C-UL|
|Slat Type||Large contour (LL), Flat (UF), Insulated (UI), Small contour (US)|
|Endlocks/Baffled Endlocks||Zinc Plated Cast Iron|
|Gauge||18, 20, 22, 24-Gauge|
|Bottom Bar||Hot-Rolled, Steel Angle|
|Color/Finish||Standard: White, Gray or Tan; Optional ArmorBrite Powdercoated or Galvanized|
|Mounting||Face (E or Z) or Jamb|
|Guide Constuction||Hot-Rolled Steel Angle|
|Jamb Constuction||Steel, Masonry or Non-masonry|
|Wear Strips||Polyethelene Tape (UHMW)|
|Color/Finish||Black or ArmorBrite Powdercoated|
|Type||Torson Spring System (Standard or High-Cycle)|
|Head Plates||Thickness: 1/4", 3/8", 1/2"|
|Barrel||Size: 4", 6", 8", 10", 12"|
|Springs||Inside Diameters: 2-7/8", 4-9/16", 6-1/4", 8-3/8"; Configuration: Single, Duplex, Tri-Plex|
|Bearing Plug Assembly||Removable: 4" or 6"; Welded: 8", 10", 12"|
|Shafts||Solid Shaft: 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2"|
|Counterbalance Hardware||Includes all required components.|
|Baffles||Flame baffle (required on fire-rated doors)|
|Hood||Type: Round; Material: Steel (24 ga.)|
|Weight Counterbalance Cover||Material: Steel (24 ga.)|
|HeadPlate Cover||Material: Steel (24 ga.)|
|Color/Finish||Standard: White, Gray or Tan; Optional ArmorBrite Powdercoated, Galvanized|
|Type||Fusible Links (McCabe, Globe); Electro-Thermal Link (Optional with Junction Box); Solid State Fail-Safe Units (LM21XP, LM21XPBB, LM21AFCB)|
|Descent Control||Mechanical Oscillating, Viscus Governor, Centrifugal Governor|
|Miscellaneous Parts||Curtain Stops, Hood Support|
|Nuts/Bolts||Headplate Bolts, Lag Screws, Thread Cutters, Masonry Anchors, Hood Screws, Drive Pins|
|Lock||Locking Bars, Hand-Chain Lock, or Cylinder Lock|
|Seals||Header Brush, Flame Baffle, Guide Brush|
|Detection Equipment||Ionization, Photo-Electric, Heat|
|Counterbalance||1 Year or Cycle Life|
Custom Colors: Armorbrite™: 187 Custom Powdercoated colors available
|CSI Master Format||Microsoft Word Document||PDF Document|
|Clearance and Dimension Configurator
Use this tool to quickly find the Clearances & Dimensions for a Raynor Fire Door, based on gauge, slat type and mounting options.
Raynor warrants the door and its component parts for one (1) year against defects in material and workmanship.
Hardware & Spring Components
Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year.
Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for installations or repairs shall be the responsibility of the consumer and must be performed by an authorized Raynor Dealer. This warranty applies only to doors that are professionally installed by an authorized Raynor Dealer.
This warranty extends only to the original purchaser. This warranty is not transferable.
This warranty does not apply to any damage or deterioration caused by abuse, applied paint failure or failure to provide reasonable and necessary maintenance.
Raynor shall not be liable for any consequential or incidental damages.
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.
Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.
Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.
This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.