Request Service Request Estimate
Call Today: (503) 620-1205

Optima

ControlHoist 2.0 Optima

Designed for larger sectional doors, rolling doors and higher-cycle applications, the ControlHoist 2.0 Optima is a heavy-duty, gear driven commercial operator that is built with a continuous-duty, overload protected motor with high starting torque. All units feature heavy-duty industrial ball bearings, worm gear drive in oil bath and an electromechanical brake. Innovative features along with durable mechanical design, provide consistent and reliable operation for the most stringent agricultural, commercial, or industrial applications.
Contact us about this product
DOWNLOAD PRODUCT BROCHURE

Standard Features

Entrapment: UL 325 2010 requires all commercial operators to be either constant pressure to close or be equipped with an approved monitored entrapment protection device such as a monitored photo eye or reversing edge. All ControlHoist 2.0 commercial operators are provided standard with constant pressure to close. Up to two (2) monitored entrapment devices can be selected with all ControlHoist 2.0 operators. In addition a non-monitored entrapment device can also be selected.

LCD (Liquid Crystal Display): The 16 character LCD display allows for easy programming with an intuitive set up menu. Status indicators provide real-time status and display error messages for easy troubleshooting assistance.

Cycle Counter: LCD (Liquid Crystal Display) clearly indicates the exact number of cycles logged for easy maintenance support.

Fire Station Timer: Ideal for fire stations. A push button or pull cord can be used to activate the open cycle and timer to close feature. Only the push button or pull cord will control the timer to close.

Programmable Mid-Stop: Adjustable from 3-30 seconds, this feature enables partial opening of door to a preprogrammed position for energy savings, time savings and convenience.

Timer-To-Close: Closes the door automatically after a predetermined amount of time has elapsed for security and convenience.

Ventilation Feature: When a device such as a CO detector is activated, door will partially open for a pre-determined amount of time. Once the CO detector is clear, the door will close.

Motor: Continuous-duty, overload protected motor with high starting torque.

Drive Reduction: Primary reduction is worm gear running in warm bath. Seconday reduction is by chain and sprocket.

Electro Magnetic Brake System: 24V DC brake. Fewer mechanical parts for improved reliability.

Adjustable Friction Clutch: Helps to protect the door and operator from damage should it come into contact with any obstruction.

3-Button Control Station: Provides open/close/stop functions.

Exterior Radio Control Terminal: Provides for fast and easy connection of radio controls. When range is an issue, an external mounted radio receiver allows the flexibility for the receiver to be moved to a new location for improved range.

Removable Terminal Strip: The two-piece, snap in place, removable terminal strip allows for easy wiring as opposed to competitive product that only offers a traditional stationary terminal strip.

Technical Details

Operation Mode   Trolley, Dual Trolley or Jackshaft with hoist  
Duty Cycle   30 Cycles/Hour  
Drive   Gear  
Environmental Options   NEMA 1, NEMA 4, NEMA 12  
Motor   Continuous Duty - 1/2, 3/4, 1, 1-1/2, 2 hp  
Logic   Solid State  
Circuit Board   Solid State Logic with LCD Display, Removable Terminal Strip and Auxiliary Board Harness  
Power   115/230V 1-Phase, 230/460/575V 3-Phase  
Brake   Electro-Mechanical Type Standard  
Wiring Options   24V Class 2, On-Board Selection  
Radio Receiver   Optional  
Radio Transmitter   Optional  
Warranty   2 years

 

Options

Auxiliary Board

Provides auxiliary contacts for when the door is in motion and at the open and close limits. The auxiliary board provides but is not limited to the following features:
  • Courtesy Light which illuminates whenever the door is activated
  • Capability to tie into Horn & Strobes for ADA compliance
  • Capability to tie a Traffic Light to provide safe entering and exiting of the facility
  • Security feature which allows the ability to connect to a facilities security system
Reversing Mechanisms

Reversing Mechanisms

For maximum protection against accidents, Raynor recommends installing a reversing device. Pneumatic or electrical reversing sensing edges reverses the door's downward travel if contact is made with and obstruction. Photoelectric reversing systems (shown) produce an invisible beam across the door opening that, if broken stops or reverses the door's downward path. Reversing features are available in both monitored and un-monitored options.
Transmitters

Transmitters

1-, 2-, 3- and 4-button transmitters provide convenient remote activation from vehicles.

Activation Devices

Activation Devices

Choose a treadle hose (shown), pull cord, loop detector, card reader or motion detector to activate your operator.

Specifications and Drawings

Commercial Operator specifications are embedded in individual door model specifications, listed under 2.2 Door Operators.

ControlHoist Warranty

Raynor warrants the electrical operator and component parts for two (2) years against defects in material and workmanship.

Under the terms of this limited warranty, for any operator components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for installations or repairs shall be the responsibility of the consumer and must be performed by an authorized Raynor Dealer. This warranty applies only to doors that are professionally installed by an authorized Raynor Dealer.

This warranty extends only to the original purchaser. This warranty is not transferable.

This warranty does not apply to any damage or deterioration caused by abuse or failure to provide reasonable and necessary maintenance.

Raynor shall not be liable for any consequential or incidental damages.

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.

Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.

Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.

This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.

Additional Information

About Us Services FAQ